Laser welding of glass

© NorGal / Shutterstock

Femtosecond laser pulses weld glass without any additional material. The process is economical and ready for industrial practice.

Economical, high-quality laser-welding for glass? That posed a major challenge – until now! TRUMPF has developed a femtosecond laser system that replaces conventional joining processes such as glueing. The advantage: in contrast to glueing processes, no additional materials that are susceptible to evaporation or embrittlement are required. This reduces costs and increases durability as well as the stability of the seam.

Variable pulses

The special nature of glass poses considerable challenges with regard to processing: glass is hard and brittle, has lower thermal conductivity than metal and tends to crack when heated unevenly due to the internal tension developed. Femtosecond laser systems can prevent such cracking. “The laser system must permit variable programming of pauses and pulses,” explains Elke Kaiser, applications engineer at TRUMPF.

Glass is permeable to light with wavelengths ranging from ultraviolet to near infrared. Absorption takes place only when the energy densities are very high, so that processing within the glass is facilitated. The highest performance density lies deep in the lower glass at the focal point. The energy from several thousand laser beam pulses causes a melt pool to be created and pushed upwards in just a few milliseconds. Skillful thermal management and an optimal ratio of pulses and pauses prevent the glass from cracking.

Laser-welded protective caps for laser light cables

Glass components that were previously glued to each other can now be economically welded with high-quality results, as TRUMPF has demonstrated in its own production of laser light cables. Until recently, the lids of the protective caps for the laser light cables were glued on. Now, lasers are used to weld them on. The joint strength of the glass parts depends primarily on the level of pulse energy. The pulse energy for 1030 nanometer infrared light needs to be 9 microjoule.

TRUMPF is currently building a laser-welding system for reliable glass welding for mass production of the protective caps for the laser light cables in its own production plant in Schramberg. Elke Kaiser states, “The laser system also serves as a pilot system to demonstrate to potential users that new, innovative laser methods are reliable and ready for deployment in glass processing and offer immense advantages.”

The new laser welding methods for glass prove their economy and efficiency by eliminating the disadvantages of conventional methods such as glueing: optical beam paths are no longer contaminated, there is no evaporation and no long-term embrittlement of adhesives, which means that the protective caps made of glass will be considerably more durable. TRUMPF is currently preparing further applications for the laser welding of glass for use in its own production.

Required fields: Comment, Name & Mail (Mail will not be published).